As one of the largest stockists of the Galintel R3 galvanised lintels, we are sure to satisfy all your lintel requirements. Australian designed and manufactured in compliance with relevant Australian Building Codes and Standards

Steel Lintels

Flat Bar Steel Lintel 75mm x 10mm

Galintel Traditional Flat Bar is a hot rolled lintel used to support brickwork over clear openings including windows & doors.

Australian designed and manufactured.


Flat Bar Steel Lintel 85mm x 7mm

Achieves R3 Durability Rating to AS/NZS2699.3

Full Product & Warranty, compliant with relevant Australian Building Codes & Australian Standards. Not reliant on composite action.

Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. Labelled & bar coded. Australian designed and manufactured.


Angle Steel Lintel 100mm x 100mm x 6mm

Galintel Solid Base angles have been designed to support brickwork over windows & doors. The brickwork, mortar and lintel work together to form a composite beam with exceptional strength and load carrying capacity. Genuine Galintel hot dip galvanized lintels are 40% lighter than solid lintels (and 40% easier to carry) with a high strength to weight ratio.


Angle Steel Lintel 150mm x 100mm x 6mm

The original & unique profile provides a recess for mortar bedding on the vertical leg. The bonding of mortar, brickwork and lintel forms a composite beam of superior strength and load carrying capacity. Hot dip galvanised to AS/NZS4680 and are 40% lighter than conventional steel lintels with a high strength to weight ratio. R3 Durability Rating to AS/NZS2699.3 and come with a full product warranty. Engineered and university tested and are compliant with relevant Australian Building Codes & Australian Standards.


Angle Steel Lintel 150mm x 100mm x 10mm

Fully hot dip galvanised in accordance with AS/NZS4680. Achieves R3 Durability Rating in accordance with AS/NZS2699.3. Full Product & Warranty. Compliant with relevant Australian Building Codes & Australian Standards. Not reliant on composite action. Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. Labelled & Bar Coded. Australian designed and manufactured.


Renda Bar 100mm x 100mm x 8mm

Galintel Rendabar is a total load-bearing bar, specifically designed to facilitate cement rendering. The bond between mortar, brickwork and lintel forms a composite beam of superior strength and structural rigidity. Galintel Rendabars are considerably lighter than other forms of lintels, contributing to ease of handling and faster construction.


Renda Bar 150mm x 100mm x 8mm

Fully hot dip galvanised to AS/NZS4680 40% lighter than conventional steel lintels with a high strength to weight ratio. The bond between mortar, brickwork & lintel forms a composite beam of superior strength & structural rigidity. Achieves R3 Durability Rating in accordance with AS/NZS2699.3. Full Product Warranty and fully engineered & university tested. Compliant with relevant Australian Building Codes & Australian Standards Labelled & Bar Coded.


Tbar 200mm x 200mm x 7mm Multirib

Galintel Multi-Rib T-Bars are a cost effective lintels that provide structural rigidity, high strength-to-weight ratio and resistance to corrosion. The multi-rib profile forms a superior bond with the mortar. This bond between mortar, brickwork and lintel creates a composite beam of superior strength and structural rigidity. The Galintel Multi-Rib T-Bar is a total load bearing lintel designed to support 230mm brickwork over clear openings.


Tbar 200mm x 200mm x 9mm Multirib

Total load bearing lintels designed to support 230mm brickwork over clear openings. The Multi-Rib profile forms a superior bond between mortar and is hot dip galvanised in accordance with AS/NZS4680. 40% lighter than conventional steel lintels with a high strength to weight ratio. Achieve R3 Durability in accordance with AS/NZS2699.3 carrying a full product warranty. Compliant with relevant Australian Building Codes & Australian Standards and come fully engineered and university tested.


Tbar 200mm x 8mm x 200mm x 6mm

Fully machine welded structural lintel beam and are not reliant upon composite action. Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. They are fully hot dip galvanised in accordance with AS/NZS4680 and achieve R3 Durability Rating in accordance with AS/NZS2699.3. Full product warranty and fully engineered & university tested.


Tbar 200mm x 10mm x 200mm x 6mm

Fully machine welded structural lintel beam and are not reliant upon composite action. Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. They are fully hot dip galvanised in accordance with AS/NZS4680 and achieve R3 Durability Rating in accordance with AS/NZS2699.3. Full product warranty and fully engineered & university tested.


Tbar 200mm x 6mm x 200mm x 6mm

Galintel Traditional T-Bars are fully machine welded structural lintel beam manufactured in Australia using 300MPa steel.

They are traditional steel sections used in the support of brickwork over large clear openings and are not reliant on composite action.


Cavi Tbar 180mm x 240mm

The Galintel® Cavi-T-Bar™ lintel is the ideal solution for cavity walls, either double brick, or brick veneer with timber trusses. The Cavi-T-Bar™ was developed in response to demand from builders for an economical substitute for built-up steel sections such as parallel flange channel and plate. Similar to a T-bar but with a special top flange incorporated into the upright section, the Galintel Cavi-T-Bar™ provides an off-the-shelf solution for cavity walls, hot-dip galvanised, fully engineered and university tested.


Cavi Tbar 240mm x 240mm

Up to 25% lighter than built-up steel sections with a top flange for added strength. Fully hot-dip galvanised (600 g/m2) and available in standard range of lengths. Engineered and university tested. Convenient “off the shelf” solution, fully warranted and R3 durability rated.


J Bar 260mm x 200mm

Galintel® J-Bar from Nepean Building & Infrastructure is the ideal solution for cavity walls, either double brick, or brick veneer with timber trusses. Galintel® J-Bar is a registered design and was developed in response to demand from builders for an economical substitute for heavier fabricated built-up steel sections such as parallel flange channel and plate, providing up to 20% lighter weight than built-up steel. The Galintel® J-Bar product is similar to a T-Bar, however has a special top flange incorporated into the upright section to resist lateral buckling under load. J-Bar has been fully engineered and tested by the University of Sydney.


J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm

Steel Lintels

Flat Bar Steel Lintel 75mm x 10mm

Galintel Traditional Flat Bar is a hot rolled lintel used to support brickwork over clear openings including windows & doors.

Australian designed and manufactured.


Flat Bar Steel Lintel 85mm x 7mm

Achieves R3 Durability Rating to AS/NZS2699.3

Full Product & Warranty, compliant with relevant Australian Building Codes & Australian Standards. Not reliant on composite action.

Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. Labelled & bar coded. Australian designed and manufactured.


Angle Steel Lintel 100mm x 100mm x 6mm

Galintel Solid Base angles have been designed to support brickwork over windows & doors. The brickwork, mortar and lintel work together to form a composite beam with exceptional strength and load carrying capacity. Genuine Galintel hot dip galvanized lintels are 40% lighter than solid lintels (and 40% easier to carry) with a high strength to weight ratio.


Angle Steel Lintel 150mm x 100mm x 10mm

Fully hot dip galvanised in accordance with AS/NZS4680. Achieves R3 Durability Rating in accordance with AS/NZS2699.3. Full Product & Warranty. Compliant with relevant Australian Building Codes & Australian Standards. Not reliant on composite action. Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. Labelled & Bar Coded. Australian designed and manufactured.


Renda Bar 100mm x 100mm x 8mm

Galintel Rendabar is a total load-bearing bar, specifically designed to facilitate cement rendering. The bond between mortar, brickwork and lintel forms a composite beam of superior strength and structural rigidity. Galintel Rendabars are considerably lighter than other forms of lintels, contributing to ease of handling and faster construction.


Renda Bar 150mm x 100mm x 8mm

Fully hot dip galvanised to AS/NZS4680 40% lighter than conventional steel lintels with a high strength to weight ratio. The bond between mortar, brickwork & lintel forms a composite beam of superior strength & structural rigidity. Achieves R3 Durability Rating in accordance with AS/NZS2699.3. Full Product Warranty and fully engineered & university tested. Compliant with relevant Australian Building Codes & Australian Standards Labelled & Bar Coded.


Tbar 200mm x 200mm x 7mm Multirib

Galintel Multi-Rib T-Bars are a cost effective lintels that provide structural rigidity, high strength-to-weight ratio and resistance to corrosion. The multi-rib profile forms a superior bond with the mortar. This bond between mortar, brickwork and lintel creates a composite beam of superior strength and structural rigidity. The Galintel Multi-Rib T-Bar is a total load bearing lintel designed to support 230mm brickwork over clear openings.


Tbar 200mm x 200mm x 9mm Multirib

Total load bearing lintels designed to support 230mm brickwork over clear openings. The Multi-Rib profile forms a superior bond between mortar and is hot dip galvanised in accordance with AS/NZS4680. 40% lighter than conventional steel lintels with a high strength to weight ratio. Achieve R3 Durability in accordance with AS/NZS2699.3 carrying a full product warranty. Compliant with relevant Australian Building Codes & Australian Standards and come fully engineered and university tested.


Tbar 200mm x 8mm x 200mm x 6mm

Fully machine welded structural lintel beam and are not reliant upon composite action. Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. They are fully hot dip galvanised in accordance with AS/NZS4680 and achieve R3 Durability Rating in accordance with AS/NZS2699.3. Full product warranty and fully engineered & university tested.


Tbar 200mm x 10mm x 200mm x 6mm

Fully machine welded structural lintel beam and are not reliant upon composite action. Hot rolled merchant bar lintel manufactured from 300MPa Grade Steel. They are fully hot dip galvanised in accordance with AS/NZS4680 and achieve R3 Durability Rating in accordance with AS/NZS2699.3. Full product warranty and fully engineered & university tested.


Tbar 200mm x 6mm x 200mm x 6mm

Galintel Traditional T-Bars are fully machine welded structural lintel beam manufactured in Australia using 300MPa steel.

They are traditional steel sections used in the support of brickwork over large clear openings and are not reliant on composite action.


Cavi Tbar 180mm x 240mm

The Galintel® Cavi-T-Bar™ lintel is the ideal solution for cavity walls, either double brick, or brick veneer with timber trusses. The Cavi-T-Bar™ was developed in response to demand from builders for an economical substitute for built-up steel sections such as parallel flange channel and plate. Similar to a T-bar but with a special top flange incorporated into the upright section, the Galintel Cavi-T-Bar™ provides an off-the-shelf solution for cavity walls, hot-dip galvanised, fully engineered and university tested.


Cavi Tbar 240mm x 240mm

Up to 25% lighter than built-up steel sections with a top flange for added strength. Fully hot-dip galvanised (600 g/m2) and available in standard range of lengths. Engineered and university tested. Convenient “off the shelf” solution, fully warranted and R3 durability rated.


J Bar 260mm x 200mm

Galintel® J-Bar from Nepean Building & Infrastructure is the ideal solution for cavity walls, either double brick, or brick veneer with timber trusses. Galintel® J-Bar is a registered design and was developed in response to demand from builders for an economical substitute for heavier fabricated built-up steel sections such as parallel flange channel and plate, providing up to 20% lighter weight than built-up steel. The Galintel® J-Bar product is similar to a T-Bar, however has a special top flange incorporated into the upright section to resist lateral buckling under load. J-Bar has been fully engineered and tested by the University of Sydney.


J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm
J Bar 260mm x 200mm

Blog

Why Choose MET

Blog Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget placerat turpis, quis imperdiet velit. Sed viverra volutpat euismod. Aenean condimentum lacus nisl...

Read more...

Contact Us

37 Enterprise Circuit, Prestons, NSW 2170

sales@texo.com.au

1300 00 TEXO (8396)

Monday - Friday

8:00am till 5:00pm

send enquiry