Our pre-greased cavity or flat slipoints are available in stainless steal (2.4m lengths) or galvanised (3m lengths) in a variety of widths in store. We also provide a range of custom made slipjoints as well as the Hercules range of load bearing composite slipjoints.

Slipjoint

Galvanised Cavity Slipjoint

The MET galvanised cavity slipjoint is designed to bridge cavities between rigid surfaces where movement is desired. They are available in 3000mm lengths and widths of 230mm, 250mm and 270mm.


Stainless Steel Cavity Slipjoint

The MET stainless steel cavity slipjoint is designed to bridge cavities between rigid surfaces where movement is desired. They should be specified in environments that are aggressive or within the coastal boundaries. They are available in 2400mm lengths and widths of 230mm, 250mm and 270mm.


Galvanised Flat Slipjoint

The MET galvanised flat slipjoint is designed to be located between flat rigid surfaces where lateral movement is desired. They are available in 3000mm lengths and widths ranging from 90mm to 300mm. Other sizes are available upon request.


Stainless Flat Slipjoint

The MET galvanised flat slipjoint is designed to be located between flat rigid surfaces where lateral movement is desired. They are available in 2400mm lengths and widths ranging from 90mm to 300mm. Other sizes are available upon request.


HSC Series Slipjoint

Hercuslip™ Composite Slipjoint is a reliable, easily applied slipjoint material on load bearing brickwork and under concrete slabs.

It is specifically designed to centralise loads and accommodate initial shrinkage and subsequent thermal movement. Ideal for post-tensioned and cast in-situ slabs.


Bearing Pads

Herculon™ Modified Type “B” and Type “D” bearings have been developed to fulfil the need for a simple, low friction bearing on corbels and columns where a continuous slipjoint is inappropriate.

They can be cast in-situ and also in post-tensioned slabs and beams. Type “D” is used where a highly stressed bearing is required.


Bearing Pads
Bearing Pads
Bearing Pads
Bearing Pads
Bearing Pads
Bearing Pads
Bearing Pads

Slipjoint

Galvanised Cavity Slipjoint

The MET galvanised cavity slipjoint is designed to bridge cavities between rigid surfaces where movement is desired. They are available in 3000mm lengths and widths of 230mm, 250mm and 270mm.


Stainless Steel Cavity Slipjoint

The MET stainless steel cavity slipjoint is designed to bridge cavities between rigid surfaces where movement is desired. They should be specified in environments that are aggressive or within the coastal boundaries. They are available in 2400mm lengths and widths of 230mm, 250mm and 270mm.


Galvanised Flat Slipjoint

The MET galvanised flat slipjoint is designed to be located between flat rigid surfaces where lateral movement is desired. They are available in 3000mm lengths and widths ranging from 90mm to 300mm. Other sizes are available upon request.


Stainless Flat Slipjoint

The MET galvanised flat slipjoint is designed to be located between flat rigid surfaces where lateral movement is desired. They are available in 2400mm lengths and widths ranging from 90mm to 300mm. Other sizes are available upon request.


Stainless Flat Slipjoint
Stainless Flat Slipjoint
Stainless Flat Slipjoint
Stainless Flat Slipjoint
Stainless Flat Slipjoint

Blog

Why Choose MET

Blog Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget placerat turpis, quis imperdiet velit. Sed viverra volutpat euismod. Aenean condimentum lacus nisl...

Read more...

Contact Us

37 Enterprise Circuit, Prestons, NSW 2170

sales@texo.com.au

1300 00 TEXO (8396)

Monday - Friday

8:00am till 5:00pm

send enquiry