One of the largest stockists of the Ultrafloor range of concrete lintels, we offer both the 110×80 and 170×110 dimension lintels. The lintels are pre-stressed and made from high strength concrete (65MPa), which gives the lintels their superior structural capacity.

Concrete Lintels

Concrete Lintels 110mm x 80mm

UltraLintels are designed to suit standard brick courses and can be easily rendered, lined with plasterboard or external sheeting. They are pre-stressed and made from high strength concrete (65MPa) which gives the lintels their superior structural capacity.

The load carrying capacity of an Ultralintel increases significantly when the composite beam action from the
brickwork over is taken into account. This composite strength
rises as the number of brick courses above increases.


Concrete Lintels 170mm x 110mm

Ultralintels are typically installed by a Builder or Bricklayer and it is very important that the following instructions are followed during installation:
– Lintels must be placed with the rough side facing up
in order to provide a proper key into the mortar
– Lintels must be propped at intervals not exceeding
1500mm until the mortar has matured

The minimum bearing onto the brickwork is 100mm (spans up to 1200mm) and 150mm (spans > 1200mm). This is based on the assumption of a minimum brick crushing strength of 20 MPa.


Concrete Lintels 170mm x 110mm

Concrete Lintels

Concrete Lintels 110mm x 80mm

UltraLintels are designed to suit standard brick courses and can be easily rendered, lined with plasterboard or external sheeting. They are pre-stressed and made from high strength concrete (65MPa) which gives the lintels their superior structural capacity.

The load carrying capacity of an Ultralintel increases significantly when the composite beam action from the
brickwork over is taken into account. This composite strength
rises as the number of brick courses above increases.


Concrete Lintels 170mm x 110mm

Ultralintels are typically installed by a Builder or Bricklayer and it is very important that the following instructions are followed during installation:
– Lintels must be placed with the rough side facing up
in order to provide a proper key into the mortar
– Lintels must be propped at intervals not exceeding
1500mm until the mortar has matured

The minimum bearing onto the brickwork is 100mm (spans up to 1200mm) and 150mm (spans > 1200mm). This is based on the assumption of a minimum brick crushing strength of 20 MPa.


Concrete Lintels 170mm x 110mm
Concrete Lintels 170mm x 110mm
Concrete Lintels 170mm x 110mm

Blog

Why Choose MET

Blog Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eget placerat turpis, quis imperdiet velit. Sed viverra volutpat euismod. Aenean condimentum lacus nisl...

Read more...

Contact Us

37 Enterprise Circuit, Prestons, NSW 2170

sales@texo.com.au

1300 00 TEXO (8396)

Monday - Friday

8:00am till 5:00pm

send enquiry