Matrix Industries resilient tie products provide structural support while reducing transmission of structure borne noise and vibration. They are available in galvanised steel, stainless steel or, for fire rated applications, in aluminium. Stainless steel ties are recommended for use in coastal or industrial locations.

Available in both galvanised and stainless steel, Abey’s Alligator Expansion Ties are specifically designed to tie brickwork or blockwork to timber, concrete or steel columns. They are also used to connect new walls to existing walls.

Manufactured from 1.5mm galvanised steel to meet the Australian Standards for an R2 rating. These builders straps are able to be faced fixed with a gun to columns and frames to connect brick and block work.
Available in various lengths with standard widths of 20mm, 38mm & 50mm.

Manufactured from 2.5mm 304 stainless steel to meet the Australian Standards for an R3 rating. These builders straps are able to be faced fixed with a gun to columns and frames to connect brick and block work.

Available in various lengths with standard widths of 20mm, 38mm & 50mm.

Available in both galvanised and stainless steel, the 6-1 cavity expansion tie provides a rigid connection to a face fixed column. It uses a backing plate combined with a 1 series tie to create the connection. It is available in various sizes.

Available in both galvanised and stainless steel, the 6-2 cavity expansion tie provides a rigid connection between two brick or block walls. It uses a slotted and crimped plate combined with a 1 series tie to create the connection. It is available in various sizes.

Available in 1.5mm plate with 6.3mm rod in both galvanised and stainless steel, the 6-3 cavity expansion tie provides a sliding connection at the intersection between two brick or block walls.

Available in both galvanised and stainless steel, these heavy duty ties are used to bridge cavities of 90mm or more. Manufactured in 3.0mm x 20mm wide.

They are available in standard lengths.

Available in both galvanised and stainless steel, these medium duty ties are used to bridge cavities of 50mm to 150mm. Manufactured in 1.5mm x 20mm wide.

They are available in standard lengths.

Available in both galvanised and stainless steel, these heavy duty bonding ties are designed for use in twin leaf and engaged brick and block wall construction. These ties make it possible to construct bonded walls to skin brick/blockwork without a cavity & piers without the use of any headers tie.

They should be used at a rate of 1 tie per 0.2m 2 in bonded walls & 1 per course for engaged piers.

They are available in 1.5mm and 3.0mm thicknesses.

Available in 3.15mm stainless steel and 175mm long, these ties can bridge a cavity of up to 60mm.

Available in red coated galvanised 3.0mm and 4.0mm wire. Designed to bridge cavities of between 60mm for the 3.0mm wire and 120mm for the 4.0mm wire.

Available in galvanised and stainless steel, these ties are specifically designed to be use on steel framed veneer walls.

Available in 1.5mm galvanised or stainless steel the 5-1 compression tie fixes brick or block walls to columns. It provides exceptional support and resists lateral movement by extending across two bricks.

Available with a 1.5mm plate and 6.3mm rod in both galvanised and stainless steel, the 5-2 sliding tie fixes non-bearing walls to the underside of concrete slabs and beams. It resists compression lateral movement from brick growth, block shrinkage and column movement.

Available with a 1.5mm plate and 6.3mm rod in both galvanised and stainless steel, the 5-3 dual sliding tie fixes non-bearing walls to the underside of concrete slabs and beams. It resists compression lateral movement from brick growth, block shrinkage and column movement.

Available in both galvanised and stainless steel, the 5-4 column expansion tie is a clip on tie that fixes brick and block work to flanged columns. It is available in 3 sizes, 90mm, 110mm & 160mm.

Available in both galvanised and stainless steel, the 5-5 column expansion tie is a clip on tie that fixes brick and block work to universal columns and beams. It is available in various sizes.

Available in both galvanised and stainless steel, the 5-7 column expansion tie incorporates a backing plate with the 1 series ties to create a strong ridge connection. It is available in various sizes.

Available in both galvanised and stainless steel, the 5-8 column expansion tie incorporates a backing plate with two of the 1 series ties to create a connection across a vertical expansion joint. It is available in various sizes.

Available in both galvanised and stainless steel, the 5-9 column expansion tie provides a three way connection across a vertical expansion joint. It is available in various sizes.

Available in both galvanised and stainless steel, the 5-10 column expansion tie provides a rigid connection to a face fixed column. It is available in various sizes.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick walls bridging vertical expansion joint.

Medium duty only.

Available in 1.5mm galvanised or stainless steel, the 4-1 compression tie is used when fixing non-bearing walls to the underside of concrete slabs or beams. It resists lateral movement in a compression action and stabilises the deflection and shrinkage of concrete slab and brick or block wall movement.

Available in 1.5mm galvanised or stainless steel with 6.3mm diameter rod, the 4-2 sliding tie is for fixing non-bearing walls to underside of concrete slab or beam. It resists lateral movement in a compression action and controls deflection and shrinkage of concrete slab and brick or block wall movement.

Available with a 1.5mm plate with a 6.3mm rod in both galvanised and stainless steel. The 4-3 is used to secure the end of the wall to the structure above. The sliding action allows non-loadbearing walls to resists lateral movement in compression to manage the deflection and shrinkage of concrete slab and brick or block wall movement.

0.9mm thick/ 6.3mm rod diameter

Available in both galvanised and stainless steel, the 4-4 sliding tie is for fixing cavity walls to the underside of concrete slabs. It resists lateral movement with its sliding action and manages shrinkage of concrete slab and brickwork movement.

Holes are 10mm in diameter

Available in 1200mm x 2400mm sheets, foilboard panels are manufactured from a fire retardant expanded polystyrene core with dual laminated aluminium surfaces.

They are used to provide insulation to internal and external walls in any construction application.

Aluminium tape, flexi-fasterners, saddles, tek screws and blank plates.

Galvanised woven mesh stabilises and reinforces the mortar bed too provide a more robust brick and block wall.

Welded stainless steel brick reinforcement. Stainless steel brickmesh should be used in areas that are within 1,000 meters of breaking surf.

Rendergrip B is a thixotropic acrylic bonding agent and primer as part of Aftek’s repair compound package. Rendergrip B is specifically used where a high build repair mortar is required.

Available in 3.0mm galvanised and stainless steel, the 7-1 strap connects single internal brick veneer walls to roof structures.

Available in 3.0mm galvanised and stainless steel, the 7-2 strap connects single internal brick veneer walls to roof structures by fastening to the top plate.

Available in 3.0mm galvanised and stainless steel, the 7-3 strap connects single internal brick veneer walls to roof structures by fastening to the rafters.

Available in 3.0mm galvanised and stainless steel, the 7-4 strap connects single internal brick veneer walls to roof structures by fastening to the rafters or steel plates.

Available in 3.0mm galvanised and stainless steel, the 7-5 strap connects single internal brick veneer walls to roof structures by fastening with bolts to the rafters or purlins.

Available in both galvanised and stainless steel, Abey’s Alligator Expansion Ties are specifically designed to tie brickwork or blockwork to timber, concrete or steel columns. They are also used to connect new walls to existing walls.

Available in 316 and 304 grade stainless steel, the Staifix RT2 wall tie is for use in the external walls of houses and small commercial developments not greater than 15 metres in height.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick walls bridging standard or larger cavities.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick walls bridging smaller cavities.

Available in both galvanised and stainless steel, Abey Veneer Tremor Ties’ are designed to secure brickwork to columns and with an adjustment, bridge cavities. The two-part construction, consists of an ‘arm’ piece which is manually fitted to an ‘anchor’ plate. The anchor plates can be fixed prior to commencement of bricklaying, and the arm inserted as the brick courses rise.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick veneer walls where connection to a timber frame is required.

Available in both galvanised and stainless steel, the 3-1 tie is a compression tie for bed joint bridging of vertical expansion joints. It resists lateral movement in compression and gives full course stability for single skin walls. It is able to be used in both brick and block work.

Available in 1.5mm galvanised or stainless steel, the 4-1 compression tie is used when fixing non-bearing walls to the underside of concrete slabs or beams. It resists lateral movement in a compression action and stabilises the deflection and shrinkage of concrete slab and brick or block wall movement.

Matrix Industries resilient tie products provide structural support while reducing transmission of structure borne noise and vibration. They are available in galvanised steel, stainless steel or, for fire rated applications, in aluminium. Stainless steel ties are recommended for use in coastal or industrial locations.

Available in both galvanised and stainless steel, Abey’s Alligator Expansion Ties are specifically designed to tie brickwork or blockwork to timber, concrete or steel columns. They are also used to connect new walls to existing walls.

Available in both galvanised and stainless steel, Abey’s Alligator Expansion Ties are specifically designed to tie brickwork or blockwork to timber, concrete or steel columns. They are also used to connect new walls to existing walls.

Available in both galvanised and stainless steel, Abey Veneer Tremor Ties’ are designed to secure brickwork to columns and with an adjustment, bridge cavities. The two-part construction, consists of an ‘arm’ piece which is manually fitted to an ‘anchor’ plate. The anchor plates can be fixed prior to commencement of bricklaying, and the arm inserted as the brick courses rise.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick walls bridging vertical expansion joint.

Medium duty only.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick walls bridging standard or larger cavities.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick walls bridging smaller cavities.

Available in both galvanised and stainless steel, these ties are best suited for single skin brick veneer walls where connection to a timber frame is required.

Available in 1200mm x 2400mm sheets, foilboard panels are manufactured from a fire retardant expanded polystyrene core with dual laminated aluminium surfaces.

They are used to provide insulation to internal and external walls in any construction application.

Aluminium tape, flexi-fasterners, saddles, tek screws and blank plates.

Rendergrip B is a thixotropic acrylic bonding agent and primer as part of Aftek’s repair compound package. Rendergrip B is specifically used where a high build repair mortar is required.

Available in 316 and 304 grade stainless steel, the Staifix RT2 wall tie is for use in the external walls of houses and small commercial developments not greater than 15 metres in height.